TECHNICAL DOCUMENTATION

SSP 861213 – The ID4 Electromechanical Brake Servo (eBKV)

PDFEN23 pages987 KB
SSP 861213 – The ID4 Electromechanical Brake Servo (eBKV) - PDF cover

This PDF is currently unavailable.

Read document text
Self Study Program 861213The ID.4 Electromechanical Brake Servo (eBKV)Tablet Format Volkswagen Group of America, LLC Volkswagen Academy Published in U.S.A. 2/2021 SSP 861213©2021 Volkswagen Group of America, LLC. All rights reserved. All information contained in this manual is based on the latest information available at the time of publishing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, LLC., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, nor may these materials be modified or reposted to other sites without the prior expressed written permission of the publisher. All requests for permission to copy and redistribute information should be referred to Volkswagen Group of America, LLC. Always check Technical Bulletins and the latest electronic repair information for information that may supersede any information included in this booklet. Trademarks: All brand names and product names used in this manual are trade names, service marks, trademarks, or registered trademarks; and are the property of their respective owners. Table of ContentsIntroduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Design of the Electromechanical Brake Servo Module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 How the Electromechanical Brake Servo Works. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Brake Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 IntroductionDue to the increasing number of electric vehicles and the low vacuum produced in the intake manifolds on modern combustion engines, a method to enhance braking force is needed. The Electromechanical Brake Servo (eBKV) provides a solution to these concerns. In addition to enhancing braking force, this system also reduces the total weight of the brake system, allowing further CO2 emission reduction for vehicles with combustion engines.1 IntroductionTechnical features of the Electromechanical Brake Servo (eBKV):• Parallel axis electric drive • Weight-saving gear unit • Weight saving control unit housing • Vacuum-free brake force boosting • No additional pressure accumulator • Up to 5.3 kN power assistance • Weight of approx. 9.7 lb (4.4 kg) • Motor output 370 W • Voltage range 9.8–16 V • Maximum torque of 2.4 lb/ft (3.3 Nm)Advantages of the eBKV• Particularly fast brake pressure build-up for driver assist functions • High safety advancement • Reduced wheel brake drag torque • Comfortable pedal feel • CO2 savings due to weight reduction and omission of vacuum pump • Long service life • Redundant brake system for Electronic Stability Control (ESC)2 IntroductionSafety Increases due to the eBKVThe eBKV increases the effectiveness of driver assist systems, such as Front Assist, in potential accident conditions that require extremely high pressure braking increases. This cannot be performed using conventional vacuum-based systems. This results in a shorter stopping distances than conventional systems: • A reduced emergency braking distance of up to 4.2 ft (1.3 m) with deceleration from 18.5 mph (30 km/h) to a stop • Collision speeds can be reduced by approximately 1.8 mph (3 km/h) due to the shorter stopping distance This also allows pedestrian accident avoidance to be improved by 10%. Reducing collision speed decreases the energy that the body has to absorb during the impact, improving occupant protection.Vehicle Speed 18.5 mph (30.0 km/h)Emergency Braking Distance with ESCEmergency Braking Distance with eBKV4.2 ft (1.3 m)3 IntroductionWhat is Reduced Brake Drag Torque?Brake drag torque occurs with disc brakes after a braking event. Brake drag torque leads to higher fuel consumption and increased CO2 emissions. After a braking event, the brake pads retract to their starting position as brake pressure decreases. Due to slight wobbling of the brake disc in relation to the brake caliper, combined with tight clearance, the whole brake pad does not immediately lose contact with the brake disc. There is still transitional frictional contact between the brake disc and the brake pad. By using a clip in the brake caliper, the pads can be mechanically retracted faster.Brake CaliperBrake PadClip4 IntroductionConventional, Vacuum-based Brake SystemsVacuum-based brake systems create vacuum using multiple methods: • Intake manifold evacuation while the combustion engine is running • A mechanical vacuum pump • An electric vacuum pump Brake Fluid Reservoir Brake ServoThese methods have some partial disadvantages: • Poor CO2 figures • Heavy weight • High production costsTandem Brake Master CylinderESC UnitVacuum PumpBrake Caliper5 IntroductionCurrent Brake Systems for Electric VehiclesThis is the 1st Generation eBKV. It is used in high-voltage vehicles. Its distinguishing feature is a special pressure accumulator for the brake system. It stores brake fluid during recuperation, reducing the brake pressure in the system. The disadvantages are: • The space required • The separate drive for the active accumulator • Its weight Tandem Brake Master Cylinder Brake Fluid Reservoir Electromechanical Brake Servo Generation 1ESC UnitBrake System Pressure AccumulatorBrake Caliper6 IntroductionElectronic Brake ServoThe eBKV has an accumulator integrated into the ESC unit that holds brake fluid during recuperation, instead of an external brake system pressure accumulator. The advantages of this system are: • No additional space required for additional components • Weight reduction • Lower CO2 emissions • Reduced costs Tandem Brake Master Cylinder Electromechanical Brake ServoBrake Fluid ReservoirESC UnitBrake Caliper7 Design of the eBKVExterior DesignThe eBKV has the following components: • The housing • The push rod with boot • The motor/gear unit • J539 Brake Booster Control Module • The brake fluid reservoir • The tandem brake master cylinder Housing J539Push Rod with BootMotor/Gear Unit8 Design of the eBKVFunctionWhen the driver presses on the brake pedal, the push rod introduces this movement into the assembly. This movement is sensed by the transferred by the Brake Pedal Position Sensor G100, which is part of the Brake Booster Control Module J539. The G840 Brake Booster Motor Position Sensor is also intgral to the J539, and relays the current motor position. The J539 uses the information about the driver’s brake request and the motor position to calculate the brake servo movement required. To initiate movement, the reinforcing sleeve is moved to the left by the pinion shafts, located on either side of the reinforcing sleeve. As the reinforcing sleeve moves, the push rod also moves. The braking force is increased by seven to eight times when the electromechanical brake servo is used. When the braking request is removed, the spring located between the master cylinder and the reinforcing sleeve pushes the reinforcing sleeve/push rod back to its original position.G840G100Reinforcing SleeveTandem Brake Master CylinderSpring Push Rod Gear Mechanism Pinion ShaftPush Rod9 Design of the eBKVSpring Pinion Shafts Reinforcing SleeveReleased and Engaged PositionsThese overhead images illustrate the released and engaged positions as described on the previous page.Released PositionReleased position:• The spring is relaxed • The parallel pinion shafts are on the left side of the reinforcing sleeveEngaged position• The reinforcing sleeve has moved the left • The spring is compressedEngaged Position10 Design of the eBKVDesign in Detail - Pressure Accumulator in the ESC UnitWhen compared to the 1st Generation eBKV, the active pressure accumulator has been removed. The pressure accumulator function is now integrated into the ESC unit. The ESC unit has a larger volume to accommodate this function.ESC UnitJ104 ABS Control Module Accumulator11 Design of the eBKVG100 Brake Pedal Position Sensor - Design and Failure EffectsDesignThe brake pedal position sensor has two Hall sensor elements on the boost body and a slide with four Hall magnets. The magnets are connected to the input push rod. When the driver presses the brake pedal, the Hall magnets move over the Hall sensors. This movement is interpreted as a braking request by the brake servo systemFailure EffectsIf the G100 fails, the brake function is taken over by the ESC unit. If the electromechanical brake servo and ESC fail at the same time, purely mechanical braking is still possible.12 Brake ManagementNetwork SystemThe eBKV is connected to the engine and transmission control modules using CAN-Bus.Key G85 Steering Angle Sensor J104 ABS Control Module J285 Instrument Cluster Control Module J428 Control Module for Adaptive Cruise Control J500 Power Steering Control Module J519 Vehicle Electrical System Control Module J533 Data Bus On Board Diagnostic Interface J539 Brake Booster Control Module J623 Engine/Motor Control Module J775 Drivetrain Control Module R242 Driver Assistance Systems Front Camera U31 Diagnostic Connection Powertrain CAN-bus Running Gear CAN-bus Drivers Assist System CAN-bus Convenience CAN-bus Diagnostic CAN-bus Analogue Connection13 Brake ManagementWhat is Brake Blending?The term “brake blending” comes from high-voltage vehicles. The three phase current drive of a high-voltage vehicle can be used in regenerative mode to brake (decelerate) the vehicle speed. Part of the vehicle’s kinetic energy is converted into electrical energy and thermal energy during the process and the vehicle speed decreases. Depending on the battery charge level and the temperature of the high-voltage battery, it is not always possible to use the high-voltage system for deceleration. Any fluctuations in deceleration are covered by the hydraulic brake system. Since the eBKV responds much faster than vacuum-based systems, this collaboration between hydraulic braking and high-voltage braking is very efficient.ESC Unit Wheel BrakesThree-phase Current Drive Driver's Braking Demand14Situation-based interaction between braking effect from three-phase current drive and braking effort from eBKVeBKV Brake ManagementBrake Blending Process - Deceleration RequirementWhen brake pedal actuation occurs, which is detected by the J539 Brake Booster Control Module, the eBKV will build up pressure.ESC Unit Wheel BrakesThree-phase Current Drive Driver's Braking DemandeBKV15 Brake ManagementBrake Blending Process - Frictional DecelerationThe brake pressure built up in the hydraulic brake system presses the brake pads against the brake disc. Due to the resulting friction, part of the vehicle’s kinetic energy is converted into thermal energy and radiated. This energy is lost.Required Brake Pressure is Built Up ESC Unit Braking InterventionDriver's Braking DemandBraking Support from eBKV16 Brake ManagementBrake Blending Process - Recuperative DecelerationIf the charge level of the high-voltage battery and its temperature are suitable, a large part of the frictional deceleration can happen using the regenerative mode of the three-phase current drive. The vehicle’s kinetic energy is converted into electrical energy, stored in the high-voltage battery and can be used for acceleration. In this process, which is known as recuperation, a small amount is lost as thermal energy due to bearing friction and the heat occurring during induction. Since the braking effect happens using the high-voltage drive, brake pressure in the hydraulic system and the electrical brake force boosting are reduced. Electrical energy is saved by the not using the hydraulic brake system.Low Brake Pressure is Built Up ESC Unit Braking InterventionMain Braking Effect Through Three-phase Current DriveDriver's Braking DemandBraking Support from eBKV17 Brake ManagementBrake Blending Process - Supporting DecelerationIf the charge level of the high-voltage battery and its temperature do not allow recuperative deceleration to be used, hydraulic braking must be used to slow the vehicle. The eBKV and the hydraulic brake system intervenes and supplies the required braking force using the wheel brake cylinders. The driver does not notice any of this interaction since the eBKV acts autonomously and will automatically build up the brake pressure without driver intervention.High Brake Pressure is Built Up ESC Unit Braking InterventionSmall Braking Effect Through Three-phase Current DriveDriver's Braking DemandBraking Support from eBKV18 ServiceService - Work After the Electromechanical Brake Servo is ReplacedIf defective, eBKV must be replaced as a complete unit. Once the new eBKV has been installed, the brake system needs to be checked for free movement and also bled by means of a pressure test: • A free movement test is performed first. This involves testing the mechanical functions of the brake servo • The pressure test is then performed with the vehicle diagnostic tester using “Guided Functions”The individual steps for changing a new electromechanical brake servo vary according to model.19 Volkswagen Group of America 2200 Ferdinand Porsche Drive Herndon, VA 20171 February 2021