TECHNICAL DOCUMENTATION
SSP 990263 – The 2017 A4 Introduction

This PDF is currently unavailable.
Read document text
eSelf Study Program 990263The 2017 A4 IntroductioniAudi of America, LLC Service Training Created in the U.S.A. Created 12/2015 Course Number 990263 ©2015 Audi of America, LLC All rights reserved. Information contained in this manual is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, LLC., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, nor may these materials be modified or reposted to other sites without the prior expressed written permission of the publisher. All requests for permission to copy and redistribute information should be referred to Audi of America, LLC. Always check Technical Bulletins and the latest electronic service repair literature for information that may supersede any information included in this booklet.This eSSP contains video links which you can use to access interactive media.Revision 1:12/2015iiIntroduction ..................................................................................... 1Dimensions .............................................................................................................................................................4Body.................................................................................................. 6Introduction ...........................................................................................................................................................6 Body structure .......................................................................................................................................................6 Attachments ..........................................................................................................................................................10 Seating systems .....................................................................................................................................................12Occupant protection.......................................................................... 14Passive safety .........................................................................................................................................................14 Active safety ...........................................................................................................................................................20Engines.............................................................................................. 21Fuel tank .................................................................................................................................................................22Power transmission........................................................................... 26Overview .................................................................................................................................................................26 7-speed dual clutch transmission 0CK/0CL – S tronic .......................................................................................32 park-by-wire (PBW) parking lock ..........................................................................................................................36Running gear..................................................................................... 49Overall concept ......................................................................................................................................................49 Axles and wheel alignment ...................................................................................................................................50 Suspension with electronic damper control (1BL) .............................................................................................53 Brake system ..........................................................................................................................................................56 Steering system .....................................................................................................................................................59 Adaptive Cruise Control (ACC) ..............................................................................................................................63 Wheels and tires ....................................................................................................................................................64Electrical system............................................................................... 66Installation locations of control modules ...........................................................................................................66 Topology .................................................................................................................................................................68 Surround cameras .................................................................................................................................................70Infotainment..................................................................................... 76MMI .........................................................................................................................................................................76Climate control.................................................................................. 77Introduction ...........................................................................................................................................................77 Climate control housing ........................................................................................................................................78 Steering wheel heating .........................................................................................................................................79Service............................................................................................... 80Inspection and maintenance ................................................................................................................................80Self-study programs.......................................................................... 81 Knowledge assessment..................................................................... 82This eSelf Study Program teaches a basic knowledge of the design and functions of new models, new automotive components or technologies. It is not a Repair Manual! All values given are intended as a guideline only. For maintenance and repair work, always refer to the current technical literature.NoteReferenceiiiivIntroductionThe A4 family and its predecessor the Audi 80 have been technological innovators and true winners for many decades. The new Audi A4 sedan features numerous highend technologies which set higher benchmarks for its class. These features combine elegant design with an innovative operating concept, systematic lightweight construction and new, efficient drivetrain solutions. The Audi A4 sedan is also ahead of its peers in terms of infotainment and assistance systems. When it comes to interior dimensions, the new Audi A4 sedan is ahead of its predecessors in almost every aspect. The passenger compartment offers a feeling of genuine spaciousness. The design features underscore this impression, as its clear architecture is strictly focused on horizontal lines. In terms of aerodynamics, the new model dramatically out paces the competition. The Audi A4 sedan has a drag coefficient of 0.23. Even the rear design plays a pivotal role in terms of aerodynamics. On the new Audi A4 sedan, the lines of the rear trunk lid ensure that the air flow is smooth. As a result of these changes, Audi drivers can look forward to a truly high-tech experience - an innovative synthesis of technology and aesthetics.Learning objectives of this eSelf-Study Program: This Self Study Program describes the design and functioning of the Audi A4. When completed, you will be able to answer questions on the following topics: • • • • • • New features of the body. New features of the occupant protection system. New power transmission features. New chassis features. Function of the surround camera. New features of the climate control system.1Engine (at model introduction) • 2.0l R4 TFSI engine 252 hp (188 kW) Other engine versions will become available at a later date.HeadlightsDepending on trim level, the A4 can be equipped with either xenon plus or LED headlight technology.Assistance systemsThe following systems are optionally available: • Adaptive cruise control (Stop & go including traffic jam assist) • Predictive efficiency assist • Audi active lane assist • Audi side assist • Park assist • Rear cross traffic assist • Exit warning • Turning assist • Evasion assist • Camera based traffic sign recognition • Audi pre sense city, basic and rearClimate controlA three-zone automatic climate control system with separate rear controls is standard equipment on the new A4. Temperature displays are integrated into the rotary dials. When one of the capacitive rocker switches is approached by a finger, its function is shown enlarged on the LCD display and selected.2Displays and operationThe focal point of the operating system is the optional MMI all-in-touch control unit with a full touch surface. The Audi virtual cockpit and Head-up display are standard equipment on the Prestige model.BodyHot-stamped components form the high-strength, backbone of the occupant cell. They strengthen the transition from the front end to the passenger compartment, the frontal area of the roof frame, the ‘B’ pillars, the side sills and parts of the floorpan. The module cross member under the instrument panel is made of extruded and sheet aluminum, while the front cross member is an extruded profile. In addition, the nodes in the upper ends of the ‘D’ pillars are made of die-cast aluminum. The rear trunk lid is also aluminum.LED TaillightsThe dynamic rear turn signals use a series of light diodes switched sequentially from inside to outside in the direction of turn, clearly signaling the car’s direction to other road users.644_036Power transmissionAt model introduction, the A4 will be equipped with a 7-speed S tronic dual clutch transmission. This will be used in both the front wheel drive and quattro models.SuspensionThe A4 now has electro-mechanical steering in addition to the newly developed five-link front and rear axles. The optional Audi adaptive suspension now has a central control module to help ensure ideal interaction between the driving conditions and system function. With the use of Audi drive select, ride dynamics can also be tailored by the driver.3Dimensions56.2 in (1427 mm)Audi A437.8 in (985 mm)Audi A461.9 in (1572 mm) 72.5 in (1842 mm)644_04761.2 in (1555 mm) 79.6 in (2022 mm)644_048mm 1 )(1040.37. 54 inin (95326mm )880 34.6 in (880 mm)111.0 in (2820 mm) 186.1 in (4726 mm)40.4 in (1026 mm)644_049426.9 in (684 mm)55.9 in (1421 mm) 3)58.1 in (1476 mm) 2)56.9 in (1446 mm) 2)54.5 in (1384 mm) 2)42.5/41.3 in (1081/1050 mm)4) 39.4 in (1000 mm)644_050Exterior dimensions and weightsInner dimensions and other specificationsLength Width (not including exterior mirrors) Width (including exterior mirrors) Height Front track width Rear track width Wheelbase Curb weight Gross vehicle weight186.1 in (4726 mm) 72.5 in (1842 mm) 79.6 in (2022 mm) 56.2 in (1427 mm) 61.9 in (1572 mm) 61.2 in (1555 mm) 111.0 in (2820 mm) 3152.6 lb (1430 kg) 4475.3 lb (2030 kg)Front cabin width Front shoulder width Rear cabin width Rear shoulder width Load sill height Trunk capacity Drag coefficient cw Capacity of fuel tank58.1 in (1476 mm)2) 55.9 in (1421 mm)3) 57.7 in (1466 mm)2) 54.5 in (1384 mm)3) 684/6344) 16.9 cu ft (480 l) 0.23 15.3 /14.3 gal (58l / 54l)4)Maximum headroom Elbow room width 3) Shoulder room width 4) Front wheel drive /quattro drive1) 2)All dimensions refer to the unladen weight of the vehicle.5BodyIntroductionThe A4 sedan has a multi-material design. This lightweight construction concept utilizes die-cast aluminum components in addition to regular sheet-metal parts. A decisive factor in modern body construction is the lightness and rigidity of the body structure as a whole. The bodies of the Audi A4 incorporate die-cast aluminum components in addition to soft, high-strength, modern highstrength and ultra-high-strength sheet-steel components. Due to geometrical lightweight construction and an intelligent material mix, the body of the Audi A4 is 33.0 lb (15 kg) lighter than the previous version of the Audi A4.Body structureUltra-high-strength hot-stamped components are used in the following areas: • • • • • • • • Front frame side member. Front side member reinforcement. Bulkhead (tunnel bridge). ‘A’ pillar. ‘B’ pillar. Inner chassis rail (sill). Upper tunnel reinforcement. Rear frame side member.Key:Die-cast aluminum Aluminum profile Ultra-high-strength steel (hot-stamped) Advanced high-strength steel High-strength steel Soft steel6Ultra-high-strength steel (hot-stamped)Hot-stamped components form the high-strength, backbone of the occupant cell. They strengthen the transition from the front end to the passenger compartment, the frontal area of the roof frame (‘A’ pillar), the ‘B’ pillars, the lower beams and parts of the floorpan. They constitute 17% of the body structure. Special care must be taken when handling hot-stamped steel during repairs to the body. This material must not be straightened or reshaped, even if the deformation is only minimal, due to its high yield strength and rebound characteristics. Special attention was given to service solutions during the development of the body structure. This means that damaged components are replaced fully or partially at specially designated parting cut areas.Sectional repairs may be performed on the following hotstamped components: • ‘A’ pillars. • ‘B’ pillars.All other hot-stamped components must, if damaged, be completely replaced to manufacturer specifications. High heat input into the welding area would irreversibly compromise the strength and structure of the component through micro-structural changes in the material.644_1527Outer skinThe A4 sedan has a steel outer skin. The attachments are also made of steel. Only the bumper impact beams and the rear trunk lid of the Audi A4 are made of aluminum. The rear lid is deep-drawn in the press using what is known as an "intelligent" tool process. Laser sensors measure how the sheet metal behaves during the shaping process. If necessary, electrically operated drawing aids make small adjustments to the press. This results in even higher precision to the stamped component.Outer skin of the A4 sedanSheet aluminum Die-cast aluminum Aluminum profile Ultra-high-strength steel (hot-stamped) Advanced high-strength steel High-strength steel Soft steel644_1548Aluminum castingsThe aluminum castings in the vehicle structure are joined to the adjacent sheet-metal parts by punch riveting and structural adhesive. The adhesive also serves to insulate both materials from one another, thus preventing contact corrosion. Specific repair solutions have been developed for repairing damage to these aluminum castings and adjoining sheetsteel parts. Straightening and reshaping work is not permitted in the area of these components.Structural integration of the spring strut The front spring strut mounts are die-cast aluminum components. Compared with sheet-steel components, which are welded together out of several parts, they reduce weight in the Audi A4 by a total of 17.6 lb (8.0 kg). This design allows a very stiff connection between the upper wishbones and the car body helping to ensure optimal conditions for driving dynamics.Side member, wheel arch upper end (fender stay)Spring strut mount644_1569AttachmentsDoor handlesThe kinematics of the door handles on the Audi A4 have been modified. Door handles typically move in a horizontal direction only. The 2017 A4 door handle now swivels approximately 30° upwards. This results in an action which is anatomically adapted to the movement of the hand and provides better ergonomics when opening the door.644_106644_10710Active radiator louver(not available at vehicle introduction)The Audi A4 may be equipped with an active cooling air intake system which improves aerodynamics and assists the thermal management system. Unlike the Audi Q7, the A4 features a split active cooling air intake system. The upper and lower louvers can be activated separately.Three positions are possible depending on input variables such as coolant temperature, engine temperature and transmission temperature. • Both louvers closed. • The lower unit open and the upper unit closed (to ensure earlier air flow through the charge air cooler). • Both louvers open. The lower louver does not have a bottom shutter plate. This ensures a continuous, forced flow of air through the charge air cooler. Both louvers are open at speeds over 99.4 mph (160 km/h).Upper radiator louverLower radiator louver644_111SunroofA conventional glass sliding sunroof is standard for the A4 models. Sedan644_10411Seating systemsThe Audi A4 has eight-way power front seats as standard equipment on the Premium model while the eight-way power seats of the Premium plus and Prestige models have the additional memory function as standard. To enhance seating comfort, there is an adjustable center armrest between the front seats, two cup holders and large door pockets for storage.Standard front seatHead restraints with manual adjustment for height, angle and distanceFront seat sub-frame of high-strength steel Electric seat adjustment644_009Optional sport seatThe sport seats have electrically adjustable lumbar supports and are optionally available with seat ventilation.Driver Seat Backrest Blower Fan V388Driver Seat Cushion Blower Fan V390Driver Seat Adjustment Control Head E470Memory Seat/Steering Column Adjustment Control Module J136644_01012Seat memoryThe memory function allows personal seating profiles to be stored for the driver. The memory function can be operated with the radio remote key or with the recall buttons in the driver's door. Whenever the vehicle is locked, the driver's seat profile is stored and assigned to the key. The seat profile is automatically recalled when the door is opened. The outside rear view mirror settings are also stored with the seat memory.System overview and signal characteristic The information from Driver Memory Seat Control Head E97 is processed by Driver Door Control Module J386. This information is then transferred to Memory Seat/ Steering Column Adjustment Control Module J136 via the Convenience CAN. The seat module then activates the corresponding control motors.Convenience CAN644_027Key:E97 Driver Memory Seat Control Head V243 Driver Seat Angle Adjustment Motor V245 Driver Seat Height Adjustment Motor V256 Driver Seat Depth Adjustment Motor TSVL Left Front Seat Coupling StationJ136 Memory Seat/Steering Column Adjustment Control Module J386 Driver Door Control Module J519 Vehicle Electrical System Control Module13Occupant protectionPassive safetyDriver airbag Front passenger airbagDriver side knee airbagComponentsThe Audi A4 sedan has the following components and systems: • Airbag control module • Adaptive driver airbag • Adaptive front passenger airbag (front passenger airbag, two-stage) • Front side airbags • Rear side airbags (equipment option) • Side curtain airbags • Knee airbags • Front airbag crash sensors • Crash sensors for side impact detection in the doors • Crash sensors for side impact detection in the ‘C’ pillars • Center pedestrian protection crash sensor (acceleration sensor) • • • • • • • • Front side airbagFront inertia-reel safety belts with pyrotechnic belt tensioners Front inertia-reel safety belts with electrical belt tensioners Front inertia-reel safety belts with active belt force limiters Inertia-reel safety belts for second seat row with pyrotechnic belt tensioners, driver and front passenger sides Safety belt warning for all seats Front passenger airbag OFF and ON warning lamp Driver and front passenger seat position sensors Battery interrupt igniter14Passenger side knee airbagFront side airbagHead airbag, driver and front passenger sideRear side airbagRear side airbag644_11515System overview644_003a16Additional equipmentEquipment specifications may vary due to the different requirements and statutory provisions which apply to vehicle manufacturers in the various markets. Key to illustration on page 16:E24 E25 F390 F391 F392 Driver Seat Belt Switch Front Passenger Seat Belt Switch Driver Side Second Row Seat Belt Switch Center Second Row Seat Belt Switch Passenger Side Second Row Seat Belt Switch K19 Seat Belt Indicator Lamp K75 Airbag Indicator Lamp K145 Front Passenger Airbag -Disabled- Indicator Lamp N95 Driver Airbag Igniter N131 Front Passenger Airbag Igniter 1 N132 Front Passenger Airbag Igniter 2 N153 Driver Seat Belt Tensioner Igniter 1 N154 Front Passenger Seat Belt Tensioner Igniter 1 N196 Driver Side Rear Seat Belt Tensioner Igniter N197 Passenger Side Rear Seat Belt Tensioner Igniter N199 Driver Thorax Airbag Igniter N200 Front Passenger Thorax Airbag Igniter N201 Driver Side Rear Thorax Airbag Igniter N202 Passenger Side Rear Thorax Airbag Igniter N251 Driver Head Curtain Airbag Igniter N252 Front Passenger Head Curtain Airbag Igniter N253 Battery Interrupt Igniter N295 Driver Knee Airbag Igniter N296 Front Passenger Knee Airbag Igniter N490 Driver Airbag Release Valve Igniter N491 Front Passenger Airbag Release Valve Igniter T16 Data Link ConnectorG128 Front Passenger Occupant Detection Sensor G179 Driver Thorax Airbag Crash Sensor G180 Front Passenger Thorax Airbag Crash Sensor G256 Driver Side Rear Thorax Airbag Crash Sensor G257 Passenger Side Rear Thorax Airbag Crash Sensor G283 Driver Front Airbag Crash Sensor G284 Passenger Side Front Airbag Crash Sensor G551 Driver Belt Force Limiter G552 Front Passenger Belt Force Limiter G553 Driver Seat Position Sensor G554 Front Passenger Seat Position Sensor J234 J285 J533 J706 J854 J855 Airbag Control Module Instrument Cluster Control Module Data Bus On Board Diagnostic Interface (Gateway) Passenger Occupant Detection System Control Module Left Front Seat Belt Tensioner Control Module Right Front Seat Belt Tensioner Control ModuleWire colors: Diagnostics CAN Infotainment CAN FlexRay Input signal Output signal17SensorsFront Passenger Occupant Detection Sensor G128 with Passenger Occupant Detection System Control Module J706 Front Passenger Occupant Detection Sensor G128 is a second-generation component that was also used on the 2015 Audi TT for the North American market. In this new-generation system, the seat heater element (Front Passenger Seat Heating Element Z8) serves not only as a seat heater but also as a sensor mat for seat occupancy recognition. As before, capacitive sensors are used for occupancy recognition. Passenger Occupant Detection System Control Module J706 is connected to ground by a discrete wire. To prevent interference with the capacitive system, the wires leading to Front Passenger Occupant Detection Sensor G128 are shielded. J706 is connected to Airbag Control Module J234 by a LIN bus.644_012Front Passenger Occupant Detection Sensor G128644_013Service KitFront Passenger Occupant Detection Sensor G128 and Passenger Occupant Detection System Control Module J706 are calibrated to one another during the manufacturing process. In the event of a fault to either of these components, they must be replaced as a unit. It is not permitted to interchange individual components. Service Kit version 1 • Passenger Occupant Detection System Control Module J706. • Seat cushion. • Front Passenger Occupant Detection Sensor G128 including wiring. In this case, the sensor is bonded to the seat upholstery. The electrical plug between G128 and J706 must never be disconnected. Two Service Kits are available depending on the trim level of the vehicle.Service Kit version 2 • Passenger Occupant Detection System Control Module J706. • Seat upholstery. • Front Passenger Occupant Detection Sensor G128 including wiring. In this case, the sensor is stitched to the seat upholstery.DiagnosticsBoth G128 and J706 are diagnosed via Airbag Control Module J234. If a Service Kit is replaced, a basic setting procedure must be performed using the Guided Fault Finding function. In this case, the serial number of the Service Kit is transferred to the Airbag Control Module.18Airbag Control Module J234The Airbag Control Module for the new Audi A4 is based on the control module of the 2017 Audi Q7. The characteristics have been adapted to the Audi A4.Sensors As in the 2017 Audi Q7, the driving dynamics control sensors are integrated in the Airbag Control Module of the Audi A4. These sensors measure acceleration in the X and Y directions as well as the yaw rate about the Z axis. The driving dynamics control sensors work in a lower acceleration and deceleration range than the crash sensors. The acceleration and deceleration levels which may occur during a collision are different to those which may occur when a vehicle loses grip (for example, oversteer, understeer). If the vehicle is equipped with dynamic steering (PR No. 1N8) or the quattro sport differential (PR No. GH2), the driving dynamics control sensors are duplicated in the Airbag Control Module J234. This provides redundant (multiple) backup for the sensor signals for dynamic steering and quattro Sport.644_103Airbag Control Module J234Note The Dynamic steering system and also the Sport differential will not be available at vehicle launch.19Active safetyAudi pre senseThe Audi pre sense system (pre sense city, pre sense basic, pre sense rear, pre sense front, collision avoidance assist or turn assist) of the Audi A4 has the same on-board pre sense functions as the 2017 Audi Q7. Display in instrument cluster The components and the specifications have been adapted to suit the A4. In functional terms, the Audi pre sense functions in the A4 are identical to those in the 2017 Audi Q7. Pre sense city with pedestrian recognition functionAudi pre sense54 mi 12:00 Turning assistAUTOD415 mi 71°F644_030644_031644_032Collision avoidance assist644_033Reference For detailed information about Audi pre sense, refer to eSelf-Study Program 970363, The 2017 Audi Q7 Occupant Protection and Infotainment Systems.20EnginesTorque/power curve of 2.0l TFSI engineEngine with code CYMC Power output in hp (kW) Torque in lb ft (Nm)309.8 lb ft (420 Nm)281.6 hp (210 kW)265.5 lb ft (360 Nm)241.4 hp (180 kW)221.3 lb ft (300 Nm)201.1 hp (150 kW)177.0 lb ft (240 Nm)160.9 hp (120 kW)132.8 lb ft (180 Nm)120.7 hp (90 kW)88.5 lb ft (120 Nm)80.5 hp (60 kW)44.2 lb ft (60 Nm)40.2 hp (30 kW)Engine speed [rpm]644_016aFeatures Engine code Type Displacement Stroke Bore Number of valves per cylinder Firing order Compression ratio Power output at rpm Torque at rpm Fuel type Engine management system Lambda/knock control Mixture formation Exhaust gas treatment Emission standard CYMC 4-cylinder inline engine 121.1 cu in (1984 cc) 3.65 in (92.8 mm) 3.25 in (82.5 mm) 4 1-3-4-2 9.6 : 1 252.0 hp (188 kW) @ 4200 - 6200 273 lb ft (370 Nm) @ 1450 - 4200 Premium unleaded 91 AKI SIMOS 18.4 Adaptive lambda control, adaptive knock control Direct fuel injection (FSI) Close-coupled ceramic calatyst, oxygen sensors before and after catalytic converter LEV III Tier 321Fuel tankThe fuel systems in the Audi A4 have the following features: • Compact design. • Maximum integration of components to reduce fuel system evaporative emissions. • No carrier plate. • Fuel delivery system with large integral swirl pot. • Use of sound-insulating baffles. • The components in the secondary chamber for example, fuel level sender in quattro models, are not accessible to service personnel. There is only one service port in the fuel tank. • A liquid trap with active extraction system is integrated in the fuel tank ventilation system. • Fluid separator at top of fuel tank filler neck.Fuel supply lineThe illustration shows the fuel tank of a front wheel drive vehicle with auxiliary heating. The auxiliary heating is optional equipment but not available in the North American Region (NAR).Filling volume Front wheel drive quattro drive 15.3 gal (58 l) 14.3 gal (54 l)Fuel delivery and sender unitFuel vent valveRollover valveBaffle22Vent line Fluid separatorCarbon canisterFuel filler neckLiquid trap with active extraction system644_03923Tank ventilation systemDue to the space constraints in new models, the tank ventilation system has been revised. It was important to ensure that siphoning cannot occur in the line from the fuel filler neck to the carbon canister.Effects of failure of the tank ventilation systemIf one of the components of the ventilation system fails, problems may occur during refuelling (refuelling shut-off). A strong fuel odor could also be noticeable in gasolineengined vehicles due to carbon canister flooding.Tank ventilation functionThe system requires a larger liquid trap due to the boiling characteristic of the fuel. The fuel that has collected in the liquid trap is extracted by means of a suction jet pump and drained off without pressure at the highest point in the tank.Fuel vent valveT pieceTransfer Fuel Pump G6Vent line to carbon canisterOpen-ended drainage outletNon-return valveSuction jet pump of active extraction systemKey: Fuel system pressure from Transfer Fuel Pump G6Liquid trap with active extraction system Extraction644_05124 Fuel return to tankNotes25Power transmissionOverview7-speed dual clutch transmission 0CLSplined propeller shaftThe following transmissions will be available at start of production: • 7-speed dual clutch gearbox 0CK – S tronic – DL382-7F – front wheel drive – refer to page 32. • 7-speed dual clutch gearbox 0CL – S tronic – DL382-7Q – all-wheel drive – refer to page 32 - 34.Front propeller shaft assemblyThe propeller shaft is splined to the transmission output shaft. For more information, please refer to eSelf-Study Program 950103, The 2011 Audi A8 Power Transmission and the Audi Service TV program "Audi A8 Power Transmission Part 2 / Topic: Splined Prop Shaft" of 02.09.2010.26Rear final driveStandard • Rear final drive 0DB – for engines with a maximum torque of up to approximately 295 lb ft (400 Nm). More more details about this rear final drive refer to eSelf-Study Program, 990163, The 2017 Audi Q7 Introduction.Emergency-releasing the parking lock – refer to page 44Rear propeller shaft assemblyThe special procedure for attaching and tightening the propeller shaft to the rear axle drive (triangular matching) is described in the workshop manual.Selector mechanism The 0CL and 0CK transmissions are operated with “shift-by-wire” and “park-by-wire” technology. – refer to page 28.For detailed information about triangular matching, please refer to eSelf-Study Program 991803, The 2009 Audi A4 Vehicle Introduction and the Audi Service TV program “Audi A5 Power Transmission / Topic Prop Shaft Assembly Concept” of 23.02.2010.644_05827Automatic transmission selector mechanismThe 2017 Audi A4 uses the latest generation Audi selector mechanism with full shift-by-wire capability (SBW). This means that parking lock operation is also fully automatic. The term used for this is "park-by-wire" (PBW). There is no selector cable connecting the selector mechanism to the transmission. This selector mechanism is currently used in the 2017 Audi Q7 and will also be used in the future C-series vehicles. The operating concept is essentially identical to the familiar operating logic of other Audi models. After every operation, however, the selector lever always returns to the center position in the automatic or Tiptronic gate. The parking lock normally engages and disengages automatically via the Auto-P function, but can also be engaged manually by the driver using the P button. Shift schematicBasic shift schematic Possible positions of the selector lever. Normal position X in automatic mode or normal position T in Tiptronic mode. This position information (A1, A2 etc.) is displayed in the measuring values using the VAS Scan Tool.644_065Tiptronic gate Automatic gatePositions selectable without moving the selector Selectable drive positions Normal position of the selector lever and current drive position Software lock: deactivate by pressing Selector Lever Release Button E681 Software lock: deactivate by pressing the foot brake1) Mechanical locking by Shift Lock Solenoid N110. Deactivated by pressing Selector Lever Release Button E681 (brake pedal must also be pushed)644_066Automatic gateA2 A1 X B1 B2Tiptronic gateXT T-T+644_068Speed-dependent transmission protection function A change in driving direction from forward to reverse and vice versa is only possible up to a driving speed of about 9.3 mph (15 km/h) with the 0CK/0CL transmissions. When this speed threshold is exceeded, a transmission protection function prevents direction reversal.644_0671) he orange-colored software lock is activated in drive position N only after about one second. This allows quick-changing of the drive position from D to R and T vice versa without applying the brake. This makes it possible, for example, to free a stuck vehicle by rocking it backwards and forwards and makes it easier to change gears when maneuvering the vehicle.28Component overviewHandle for selector lever bottom section with selector lever gateHandle for selector lever upper sectionSelector Lever Release Button E681P button – Parking Lock Button E816 with Parking Lock Indicator Lamp K320. K320 illuminates the P button in a dimmed fashion and is brightly lit when the parking lock is active.Selector Lever Transmission Range Display Y5Plug connection E Selector leverPlug connection CSelector Lever Sensor System Control Module J587Selector Lever E313Plug connection A644_069Selector Lever Release Button E681 E681 is used to deactivate the software lock (highlighted in blue in illustration 644_066) and to release Shift Lock Solenoid N110. There are two shift elements for reliability and diagnostic functions. In the event of a fault, button E681 is considered actuated. The locks marked red and blue (illustration 644_066) are disabled. A fault is registered in the control module and indicated to the driver in the DIS. To move the selector out of drive positions P and N, the brake pedal must be pressed in addition to the release button.Parking Lock Button E816 The P button is for manually deactivating the parking lock. It can only be deactivated if a vehicle equipped with the 0CK/0CL transmission is traveling less than 0.6 mph (1 km/h). E816 has three elements for reliability and diagnostic functions. The shift status is transferred to Selector Lever Sensor System Control Module J587 via two interfaces. In the event of a fault, a message appears in the DIS and the parking lock can only be engaged by the Auto P function.29Information exchange Data between the selector mechanism and the transmission is via Data Bus On Board Diagnostic Interface J533 (Gateway). Selector Lever Sensor System Control Module J587 communicates with the Infotainment CAN, Transmission Control Module J217 and the FlexRay. If J587 should malfunction preventing the transmission from operating using the selector mechanism, drive Positions, P, R, N and D can be selected by simultaneously operating both shift paddles while the vehicle is stationary with the foot brake applied.Information flow J587 registers the positions of the selector lever as well as Parking Lock Button E816 and Selector Lever Release Button E618. It sends this information to Transmission Control Module J217. The TCM engages the gear corresponding to the driver input and sends that information back to J587. J587 then activates Shift Lock Solenoid N110, Transverse Selector Lever Lock Motor V577, Selector Lever Transmission Range Display Y5 and Parking Lock Indicator Lamp K320. During gear selection, there is a short delay until the corresponding gear symbol lights up.Special feature of the dual clutch gearboxes Selector Lever Sensor System Control Module J587 has two additional interfaces for controlling Parking Lock Solenoid N486. Refer to the functional diagram on the following page.Selector Lever Transmission Range Display Y5Selector Lever Sensor System Control Module J587644_070Transverse Selector Lever Lock Sensor G868Selector Lever Position Sensor G727Note The engine does not have to be running to disengage the parking lock (P-OFF). This is because ATF is supplied by an electricpowered ATF pump and a pressure accumulator. Therefore, the supply of ATF is not dependent on engine operation and the parking lock can be disengaged when the ignition is on.30Function diagram – selector mechanismKey: E313 Selector Lever E681 Selector Lever Release Button E816 Parking Lock Button G727 Selector Lever Position Sensor G868 Transverse Selector Lever Lock Sensor J587 Selector Lever Sensor System Control Module K320 Parking Lock Indicator Lamp N110 Shift Lock Solenoid V577 Transverse Selector Lever Lock Motor Y5 Selector Lever Transmission Range DisplayInterface to parking lock holding magnet + (pin A1) Interface to parking lock holding magnet - (pin A2) CAN-High CAN-Low Infotainment CAN644_071Auto-P function The parking lock is electro hydraulically operated. This allows the TCM to automatically operate the parking lock, enhancing operating comfort. The Auto-P function engages the parking lock automatically (P-ON position) if all of the following conditions are met: • Vehicle stationary – speed less than .6 mph (1 km/h) • Driving position D, S, R or M is selected • Engine is not running – terminal 15 OFF The driver can also engage the parking lock by pressing the P button as soon as the vehicle is traveling slower than 1.2 mph (2 km/h). The parking lock is disengaged automatically (P-OFF position) if the engine is running and drive position D, S, R, N or M is selected with the brake applied and the release button pressed.Activating drive position N (P-OFF position)Automatic engagement of the parking lock can be suppressed, for example, when in a car wash. A condition is that the selector mechanism, P button and transmission are functioning properly. To activate P OFF, N must be selected when the engine is running. Then the engine must be switched off. When the ignition is switched off, the parking lock is suppressed for approximately 30 minutes. After 29 minutes the following message is displayed in the DIS: "Start engine to remain in N." along with a warning tone. If this instruction is not followed, the parking lock engages after 30 minutes and the system shuts down. If a speed signal (greater than .6 mph [1 km/h]) is detected during this time, the period is extended according to the driving time of the vehicle until the system detects that the vehicle has been stationary for at least five minutes. During the stopping period in the P-OFF position, electrical power is consumed by the activity of the control module, bus operation and the holding magnet. If the vehicle is held stationary for a lengthy period of time, the battery may become discharged to the extent that the parking lock automatically self-engages. If it is necessary to hold the parking lock in the P-OFF position for a longer period of time, the parking lock emergency release mechanism must be actuated (refer to page 36 and 44).317-speed dual clutch transmission 0CK/0CL – S tronicBoth the 0CK and 0CL S tronic transmissions are enhancements of the 0CK transmission introduced in the European Audi A6 ultra. This vehicle was never sold in the North American Region. Key new features are a variant for quattro all-wheel drive, the shift-by-wire technology and the electro-hydraulically operated parking lock with park-by-wire technology. These transmissions also use a plastic ATF pan.7-speed dual clutch transmission 0CK – front-wheel driveCombined gearbox ventilation system for the ATF and MTF systems Electrical connection for the mechatronics and Transmission Control Module J217Parking lock module – refer to page 36Transmission selector lever for emergencyreleasing the parking lock – refer to page 36Separate ATF system with ATF supply independent of engine operation644_072Electrical connection for Parking Lock Solenoid N486 • Parking lock holding magnet – refer to page 36Separate MTF system, dry sump lubrication system with MTF pumpFor detailed information about the function, design and service-related aspects of the 0CK transmission in the Audi A6 ultra (type 4G), refer to the following Audi Service TV programs: • 7-speed dual clutch gearbox 0CK – S tronic Part 1 Design and function of 26.10.2014. • Dual mass flywheel with centrifugal pendulum-type absorber of 16.01.2015.Plastic ATF pan • Use extreme care if setting the transmission down on the ATF pan. The transmission should also be secured to prevent it from tilting backwards which could damage the MTF pump.32Special features at a glanceInnovative features of the dual clutch transmission: • Clutch operation with stationary central engagement system (without rotary union) • Active clutch plate separation • Separate clutch cooling system Shift-by-wire and park-by-wire technologyLow-friction bearing concept of gear set for increased efficiencyDual mass flywheel with centrifugal pendulum-type absorberRear axle final drive without hypoid offsetDry sump lubrication system for the gear set and MTF pump • Transmission Electric Pump 2 V553Mechatronic unit with demand-responsive, full-time ATF supply independent of engine speed by means of an electrical ATF pump and pressure accumulator conceptElectric-powered tandem ATF pump • Transmission Fluid Auxiliary Hydraulic Pump V552Pressure accumulator (gas pressure hydraulic accumulator) • Note: follow the safety instructions given in the Repair Manual644_073337-speed dual clutch transmission 0CL – all-wheel driveThe quattro version – 0CL is, apart from the all-wheel drive component set, identical to the front wheel drive version – 0CK.Input shaft 2644_074MTF supply panInput shaft 1Self-locking center differential with asymmetric-dynamic engine torque split The self-locking center differential comes in different versions (different manufacturers). The characteristics of both versions are identical.Input shaft for sub-gearboxes 1 and 2The input shaft within the output shaft for sub-gearboxes 1 and 2 connects to the spur gear step of the front final drive34With the 0CK or 0CL transmission, top speed is in 6th gear. In 7th gear engine speed is reduced for better fuel economy. See also page 48.Gear shift lever for parking lock emergency release Selector shaft for parking lockParking lock moduleClutch K2Clutch K1644_075Pressure accumulator (gas pressure hydraulic accumulator) Note: please follow the safety instructions given in the Repair Manual.Spur gear step – front final driveMTF filler and inspection boltParking lock gearKey: Gearbox input, sub-gearbox 1 Gearbox input, sub-gearbox 235park-by-wire (PBW) parking lockThe 0CK/0CL transmissions for the 2017 A4 use an electro-hydraulically operated parking lock (park-by-wire). The main feature of the system is that the parking lock is not solely controlled by the Mechatronic unit; the selector mechanism is also actively involved. Selector Lever Sensor System Control Module J587 activates the parking lock magnets while Transmission Control Module J217 controls the parking lock. Refer to function chart on page 37.Parking lock springSelector shaftParking lock leverLever for emergency-releasing the parking lock – refer to page 44Pawl with springParking lock gearDrive Position Sensor G676Parking lock module1Solenoid Valve 6 VSS valve accumulator points644_095Key:Electrohydraulic control unit (control valve assembly) System pressure Depressurized Energized De-energizedTransmission Control Module J21736Function plan – 0CK/0CL transmission with park-by-wire Data is exchanged between the selector mechanism and the transmission via the Gateway over the Infotainment CAN and the FlexRay data bus – refer to page 70.Key:Selector mechanism GearboxInfotainment CANFlexRay INLING754 Transmission Fluid Temperature Sensor 2– MTF temperature sensor J217 Transmission Control Module J587 Selector Lever Sensor System Control Module N486 Parking Lock Solenoid – Parking lock holding magnet V553 Transmission Electric Pump 2 – MTF pump BP BM FlexRay Bus Plus FlexRay Bus Minus Starter control signal (P/N signal)FlexRay OUT644_0381Selector mechanismSelector Lever Sensor System Control Module J587Function The parking lock is engaged mechanically by spring force alone (P-ON). The parking lock module is disengaged (P-OFF) by hydraulic pressure produced by the Mechatronic unit. A special locking mechanism integrated in the piston of the parking lock module additionally secures the parking lock in the P-ON or P-OFF position and increases the operating reliability of the park-by-wire system. Refer to page 42. The core of the locking mechanism is Parking Lock Solenoid N486. N486 is activated by Transmission Control Module J217. Selector Lever Sensor System Control Module J587 provides feedback to J217 on the actual status of N486. J217 and J587 communicate with one another bi-directionally via the Gateway using the Infotainment CAN and the FlexRay data bus. The various functional states of the parking lock and the parking lock module are shown below:Parking lock module1 1Parking lock piston2A 2B34A 4B4C4D 4EParking lock engaged (P-ON) – refer to illustration 644_095Starting scenario The vehicle is shut off (the bus is at idle) and the parking lock is engaged (P-ON).Locking ballsCentral ball Parking lock cylinder Parking Lock Solenoid N486 – Parking lock holding magnet644_077The entire hydraulic system is depressurized and de-energized. When Solenoid Valve 6 N93 is de-energized, the inlet from the parking lock cylinder to the oil sump is open. The parking lock spring pushes the locking pawl into the tooth gap in the parking lock gear and holds the parking lock in the engaged position. The parking lock holding magnet is inactive. The locking balls do not have a locking effect because the central ball does not exert any force on the locking balls.372Parking lock disengaged (P-OFF)Selector Lever Sensor System Control Module J5872A2BParking Lock Solenoid – N486 – parking lock holding magnet2BSolenoid Valve 6 N93 Transmission Control Module J217644_0863Keep parking lock disengaged by activating drive position N (time-limited P-OFF position – refer to page 31)1)31)Note: The parking lock module is only depressurized in N after the ignition is switched OFF. This is a special function for workshop/car wash scenarios. After N is selected and the ignition is switched ON, the system pressure is applied to the parking lock module.Key: System pressure Depressurized Energized De-energized644_087382ADisengage parking lock (P-ON -- P-OFF)To disengage the parking lock, Parking Lock Solenoid N486 is deactivated. Transmission Control Module J217 then energizes Solenoid Valve 6 N93, which in turn directs the system pressure to the parking lock cylinder. The piston force is greater than the force of the parking lock spring. The parking lock is disengaged. If the P OFF position is detected by Drive Position Sensor G676, the parking lock holding magnet is activated (refer to 2B).Parking lock cylinder Parking lock pistonAnnular groove P-OFFLocking ballsCentral ballTappet with spring644_0882BKeep parking lock disengaged (P-OFF)In the P-OFF position, oil pressure is continuously applied to the parking lock piston – refer to (3) for exception. To safeguard against an unwanted pressure drop, the parking lock piston is additionally locked with the aid of a locking mechanism. This locking mechanism is actuated by Parking Lock Solenoid N486, in turn was activated by Selector Lever Sensor System Control Module J587. Function – locking mechanism / parking lock holding magnet The armature is pulled into the coil by energizing N486. The armature pushes the central ball upwards with the tappet, with the result that the locking balls are pushed into and held in the P-OFF annular groove as long as N486 is energized. To activate the lock, N486 is initially energized by applying approximately 1.2 A. To hold the lock, the current is reduced to approximately 620 mA. This prevents the coil from overheating and reduces power consumption.Coil644_089ArmatureParking Lock Solenoid – N486 Parking lock holding magnet3Keep parking lock disengaged by activating drive position N1)The P-OFF position can be maintained by selecting drive position N before switching off the ignition or before shutting off the engine (bypassing the Auto-P function). After switching the ignition off, Selector Lever Sensor System Control Module J587 remains active in local run-on mode and energizes Parking Lock Solenoid N486. Transmission Control Module J217 shuts down as soon as it has reduced the pressure inside the pressure accumulator – refer to page 41 (4D). The P-OFF position is now held solely by N486 or by the locking mechanism, which locks the parking lock piston in the P-OFF position. This P-OFF position is maintained for a limited time – refer to page 31 "Auto-P function".644_090394Engage parking lock (P-ON -- P-OFF)Starting scenario Taking (2B) as a starting point – refer to illustration 644_089 – the engine is shut off when the vehicle is stationary and the parking lock is engaged by the Auto-P function. The process of "engaging the parking lock" (up to (1) on page 41) involves several steps (4A) – (4E).4A4B644_091644_0924ATo engage the parking lock, the parking lock holding magnet must first be switched off to allow movement of the selector shaft.4BSolenoid Valve 6 N93 is deactivated and opens the inlet from parking lock cylinder to the oil sump. The pressure in the parking lock cylinder is dissipated. The parking lock is engaged (P-ON) by the parking lock spring.4C 4D4E40644_093644_094Parking lock engaged (P-ON)Drive Position Sensor G6761Solenoid Valve 6 – N93 VSS valve accumulator pointsSolenoid Valve 6 N93 – de-energized3 4 5Key: System pressure Depressurized6 1 2644_096 Energized644_076Solenoid valve 6 N93 – energized3 4 5 De-energized1 2 3 4 5 644_097 6 6 1 2System pressure from pressure accumulator To gear actuator control unit To parking lock cylinder To clutch control unit To clutch control unit To oil sumpSolenoid valve 6 N93 Solenoid valve 6 N93 has two adjacent switch positions. • Energized switches the system pressure to the parking lock cylinder. • De-energized opens the inlet from the parking lock cylinder to the oil sump.4CIf the P-ON position is detected by Drive Position Sensor G676, Selector Lever Sensor System Control Module J587 energizes Parking Lock Solenoid N486. This ensures the parking lock cannot be disengaged because of a malfunction. The pressure in the pressure accumulator is now actively reduced by alternately activating the gear actuators. After the pressure has dissipated, J217 deactivates unless prevented from doing so by other internal activity. Selector Lever Sensor System Control Module J587 remains active and energizes Parking Lock Solenoid N486. N486 is energized by J587 until the Gateway goes to sleep and deactivates J587. The parking lock is now in the starting position (1) – refer to page 36 or illustration 644_095.4D4E41Functional reliability of the parking lockThe system is configured so the P-OFF position is maintained in two ways when not faults are present: first, hydraulically by system pressure and second, electromechanically by Parking Lock Solenoid N486. If the system malfunctions during vehicle operation, this ensures that the parking lock is not engaged after a simple fault.XY644_098644_099XIf an unwanted drop in hydraulic pressure occurs in the Mechatronic unit, P-OFF position is maintained by Parking Lock Solenoid N486. Because N486 is activated by Selector Lever Sensor System Control Module J587, P-OFF position is maintained even if there is a loss of electrcal power to the Mechatronic unit.YIn the event of a fault in the power supply to N486 from J587, the P-OFF position is maintained electro-hydraulically by the Mechatronic unit.Parking lock mechanismP-OFF positionParking lock spring1Thrust bearing, fixedSliding cone with springIf the parking lock gear is as shown here, the locking pawl can lock into the tooth without resistance.Pawl with springParking lock gear644_10042Drive Position Sensor G676The position of the parking lock is monitored by Transmission Control Module J217 and Drive Position Sensor G676. With shift-by-wire, the sensor signal is used only to determine the position of the parking lock. For further information about G676, refer to the Audi Service TV program: "7-speed dual clutch gearbox 0CK – S tronic Part 2 – Service and practical advice for workshop personnel" of 26.10.2014.Sender element trimSelector shaftSliding cone and spring are pre-stressedP-ON position – locking pawl not engagedP-ON position – locking pawl engaged23644_101644_102Since the parking lock gear is "tooth to tooth", the sliding cone does not push the locking pawl into the tooth until the vehicle moves a little.For safety reasons, the geometry of the parking lock gear and the locking pawl gearing is designed so the locking pawl cannot engage at a speed of over approximately 2 mph (3 km/h).Note The parking lock gear locks the pinion shaft of the front final drive. If the vehicle is raised on one side at the front, the locking action is cancelled on the opposite wheel.43Emergency releaseDuring normal operation, the parking lock is electro-hydraulically actuated. To allow electro-hydraulic disengagement of the parking lock, the engine does not have to be running. This is because the 0CK/0CL transmissions are supplied with ATF by an electric-powered ATF pump and a pressure accumulator. The ATF supply is not dependent on operation of the engine. This means the parking lock can be disengaged when the ignition is on. To hold the parking lock in the OFF position, sufficient ATF pressure must be available or the parking lock holding magnet must have a sufficient power supply. In the event of malfunction, the emergency release mechanism is used to disengage the parking lock or to hold the P-OFF position for longer, if necessary. The emergency release mechanism of the parking lock must be actuated in the following situations: • To tow the vehicle • If the parking lock cannot be released electro-hydraulically due to a malfunction. • If the vehicle cannot be maneuvered or moved due to low supply voltage. • If the engine is not running and it is necessary to maneuver or move the vehicle, for example, in the workshop. • For function testing after carrying out assembly work on components of the emergency release mechanism.Lever for parking lock emergency releaseA special feature is the positioning of the emergency release Bowden cable in relation to the gear selector lever. A rigid rod and a mushroom-shaped plate are attached to end of the emergency release Bowden cable and surround the selector lever without touching it. This minimizes structure-borne noise transmission from the transmission to the Bowden cable, and into the passenger compartment. The plate and the gear selector lever do not make contact until the emergency release mechanism is actuated.44Attachment of the emergency release cable644_079Installation location of the emergency release mechanism In the Audi A4, the parking lock is emergency-released from inside the vehicle by means of a cable pull. The emergency release mechanism is located under the cupholder in the center console.Emergency-releasing the parking lock (P-OFF position) Warning! Before actuating the emergency release mechanism of the parking lock, the vehicle must be secured to prevent it from rolling away. The wrench and screwdriver needed for the procedure are located in the vehicle tool kit. After removing the rubber inlay, remove the cover using a screwdriver – refer to illustration 644_080. Items (1) and (2) show the procedure.Rubber inlayCover644_080Socket wrench2Emergency release cableTurn the socket wrench clockwise as far as it will go and then push it down.3Actuator unit for parking lock emergency release mechanism1Insert emergency release socket wrench into the actuator unit as shown.644_078When the parking lock emergency release mechanism is actuated, the yellow warning lamp and the drive position indicator N light up in the instrument cluster. The following message is also displayed in the instrument cluster: Vehicle may roll away! P cannot be selected. Please apply parking brake.3Deactivating the emergency release mechanism (P-ON position)Hold the socket wrench with both hands and carefully pull it out – item (3). Use one hand to guide the socket wrench, to avoid damaging other adjacent parts. If the wrench is tight, it is easier to remove if it is turned slightly clockwise. Note: Do not under any circumstances turn the socket wrench back (counter-clockwise) as this will damage the actuator unit.45Tip-shifting in D/S Manual gearshifts can be executed at any time using the shift paddles on the steering wheel positions D/S. If Tiptronic is activated, the transmission switches to manual mode for a limited time. If the vehicle is in a normal, constant driving state for a period of about 8 seconds, the transmission shifts back into drive position D or S. The countdown from about 8 seconds is stopped in the following cases: • • • • A sporty driving style is detected. When cornering. If over-run mode is detected. Selection of another gear with the steering wheel Tiptronic.Special features of the steering wheel Tiptronic function • After a long duration pull of the Tip- shift paddle (long pull-), the transmission shifts down into the lowest possible gear. • After a long duration pull of the Tip+ shift paddle, the transmission switches from temporary Tiptronic mode to automatic mode. • If a system malfunction occurs in the selector mechanism, drive positions P, R, N and D can be selected by simultaneously pulling both shift paddles, provided that the vehicle is stationary and the brake is applied.Launch control program The Launch Control Program regulates the maximum acceleration of the vehicle from a standing start. Refer to the Owner’s Manual for operating instructions and other information.It is possible to return to automatic mode before this in various ways: • Pull the selector lever back one position (position B1). • Move the selector lever from the Tiptronic gate and back into the automatic gate. • Long duration pull of the Tip+ shift paddle (long pull+).46Audi drive selectWith Audi drive select, it is possible to select between different vehicle setups. Transmission setups are tailored to the customer's requirements in a country-specific manner. For this reason, only typical differences between the various modes can be shown here.Mode comfortTransmission setup This setup is especially comfort-oriented with soft gear shifts and low engine speeds. As is the case in auto mode, gear selections are made with the aid of the driver type recognition feature. Driver type recognition in drive positions D and S: In drive positions D and S a driver type recognition is made on the basis of the driver's driving style. Criteria for driver type recognition include the mode of actuation of the brake and accelerator, the speed of the vehicle as well as transverse and longitudinal acceleration within defined periods. Accordingly, an economical driving style leads to early upshifts and late downshifts. A sporty driving style leads to late upshifts and early downshifts. The driving phases in which the driver adopts an efficient, economical, sporty or manual driving style can be seen using the VAS Scan Tool. Selector position D: Gearshifts are comfort-oriented and shift point selection is adapted to the driver's driving style with the aid of driver type recognition. Selector position S1): In Sport mode, the shift points are sporty and adapted to the performance range of the engine. The shift points are configured with the aid of driver type recognition. Shift times and shift points vary from driving in the standard sport program to a handling course setup with short, noticeable shift cycles.autodynamicIf dynamic mode is selected, transmission control module activates the sport program (drive position S). In dynamic mode, both the Tiptronic functions and drive position D are available. If selector position D is activated before shutting off the engine, selector position (D) is again activated when the engine is subsequently started1). If the driver wishes to have selector position S, he must select it. In individual mode, the driver can freely select the transmission setup irrespective of other vehicle systems.individual1)Based on the emission class, the drive programs of selector position D are always pre-selected when the vehicle is restarted.Note In the case of certain engine-transmission combinations, maximum speed is only achieved in the auto and dynamic modes.Reference For further information about Audi drive select, refer to eSelf-Study Program 970563, The 2017 A4 Electronic and Electrical Systems.47TowingIf a disabled vehicle with an automatic transmission requires towing, the usual restrictions apply: • Actuate the parking lock's emergency release mechanism. • Maximum towing speed of approximately 34 mph (50 km/h). • Maximum towing distance of approximately 34 miles (50 km). To tow the vehicle with an axle raised, the instructions in the Owner's Manual must be followed.Note For further information, please refer to the Owner’s Manual.Transmission warning lamps and driver information The transmission control module provides information and fault messages about transmission operation that are displayed in the Driver’s Information System according to their priority. Please refer to the Owner’s Manual for further information.48Running gearOverall conceptThe suspension of the 2107 A4 is a new development compared to the previous model. It is the second Audi model to use the new modular longitudinal platform (MLBevo). A key development goal was to achieve systematic lightweight construction while resolving any conflict of objectives between high ride comfort and outstanding driving dynamics.644_119The following suspension variants are available for the 2017 Audi A4:Suspension variants Standard suspension (1BA)1) Sports suspension (1BE)1)Features This is standard equipment for all models. This chassis version is optional. For all models, ride height is approximately 0.9 in (23 mm) lower than that of the standard suspension. The distinctly sporty suspension setup is achieved by using special springs, dampers and anti-roll bars. The suspension with electronic damper control is an option for the Prestige model. Ride height is approximately 0.4 in (10 mm) lower than that of the standard suspension.Suspension with electronic damper control (1BL)1)1)Production control number49Axles and wheel alignmentFront axleThe Audi A4 adopts the tried and tested five-link axle concept already used on other Audi models. The system components are basically identical in design and function to those of the front axle on the Audi Q7.Damper • Single-tube damper1) • Twin-tube damper1) • Polyurethane auxiliary spring • Low-friction axial bearings for upper strut mountings (new development) Spring • Steel springs with linear characteristicCross strut • Steel construction • bolted to sub-frame to increase rigiditySuspension strut knuckle • Cast aluminum construction • Bolted to support linkUpper link • Forged aluminum construction • Mounted directly to body without separate bearing pedestalGuide link • Forged aluminum constructionPivot bearing • Forged aluminum constructionEngine/transmission mount • Cast aluminum nodeSupport link • Forged aluminum constructionWheel bearing • Second generation wheel bearingLower ball joint • Spherical joint as connection between wishbone and pivot bearing • Aluminum housingAnti-roll bar • Tubular anti-roll barsAnti-roll bar link rod • Aluminum housing with rubber-metal bearingsWheel hub • Steel construction644_1201)Depending on suspension version.50Rear axleThe system components are basically id