Haldex Controller Gen5 Installation

Installation instruction for the Haldex Controller Gen5 0CQ/0AY.
This will apply to almost all MQB car and other Gen5 cars.

Lift the left rear seat

Locate the cover

Remove the cover

Remove the 6 pin connector from the holder

Connect the supplied loom to these connectors

Do this for both connectors

Run the wires thru the cover and put the cover back

Run the loom of the Haldex Controller to the booth

Connect the Haldex Controller and you are ready to go!

Go to the Google Play store or Apple store and download the App.